#High a vs highc how to

Tell me how you would check that the headlights and taillights are working (no need to exit the vehicle)Answer:Operate light switch (turn on ignition if necessary) as this is a tell me question there is no need to physically check the lightsĨ. Tell me how you would check that the brake lights are working on this carAnswer:Operate the brake pedal, make use of reflections in windows, garage doors etc. Gentle pressure on the steering wheel maintained while the engine is started should result in a slight but noticeable movement as the system begins to operate, alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioningĦ. Before starting a journey two simple checks can be made.

Show me/explain how you would check that the power assisted steering is working before starting a journeyAnswer:If the steering becomes heavy the system may not be working properly. Tell me how you would check that the brakes are working before starting a journeyAnswer:Brakes should not feel spongy or slack, brakes should be tested as you set off, vehicle should not pull to one sideĥ. Tell me how you would check the tyres to ensure they have sufficient tread depth and that their general condition is safe to use on the roadAnswer:Check that there are no cuts or bulges and there is at least 1.6mm of tread depth across the central three quarters of the breadth of tyre and around the entire outer circumferenceĤ. Tell me where you would find the information for the recommended tyre pressure for this car and how tyre pressure should be checkedAnswer:Manufacturers guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don't forget spare tyre, refit valve capģ. Windscreen WasherIdentify reservoir and check level against high/low markings(remember all fluids should be above and min and below max and should be check once a week)Ģ. Power Steering FluidIdentify reservoir and check level against high/low markingsE. Brake/Clutch FluidIdentify reservoir and check level against high/low markingsD.

#High a vs highc how to

Engine CoolantIdentify high/low level markings on header tank or radiator filler cap and describe how to top up to the correct level when engine is cold, level should be above low and below highC.

(remember you only describe and not actually do)B. Engine Oil LevelIdentify dipstick, describe check of oil level against min/max markers which involves removing dipstick, cleaning with rag, then replacing and removing again to check and make sure level is between min and max markers. Open the bonnet, identify where and how you would check the following:A. Driving Test Questions / Show me & Tell meġ.